In terms of a relatively standard install from a CD- that is booting from a CD or DVD Rom , the steps would be as follows:

First of all this process of booting from a CD Rom is probably the best as well as overall simplest option available.   If you do have a IDE or Sata CD-Rom first change the boot order of the startup to handle this.  Go into your bios setup .  Chose the CD Rom as the first boot device in the boot up sequence.

To enter the bios , note on the initial startup screen the key choices or strokes to “enter the bios”  or “enter the control panel”.   With today’s fast computers this may flash by you in a whiz and may have to be repeated several times.   It is usually the delete key.  Other choices include the <F2> . <F10> or >F12> keys alone or in sequence.   Be careful not to initiate a windows reoovery process by this means , although if you are doing a full hard drive Linux install this will not be of concern.  If you cannot determine what the keystroke or keystroke combination to enter your brand or model of bios – then Google “commands to enter bios”, “Commands to enter bios of your model”  , “How to get into the bios”  and “how to get into the bios of model x”  or even “I cannot get into my bios….model”.  At the worst take out a piece of hardware such as a ram stick , or disconnect a piece of hardware onyour motherboard.

On boot up your computer will recognize that the hardware configuration has changed and will enter its bios in order for you to rectify the situation.

Once in you should be able either spot the setting page simply by ” change boot order sequence” , or find a setting in the bios settings.   Failing that hunt around diligently under the hood.  Simpler on some computer bios models – there may be an additional keystroke choice simply marked “change boot order sequence”

Adger Linux

Famous People Manitoba Canada

Xbox 360 PS3 Mod Chips Shipping  Worldwide

www.adgerlinux.com

• The 2nd journey begins… Mandriva 2006 upgrade 2 - Part 5 Well, where are things? The gui installer did a good job, got the system up and running. The biggest initial problem is that it didn't change the default boot entry in lilo, which meant the system tried to boot under the old kernel and things died (likely c++ incompatibilities?) So,......
• Buying a Suitable Tennis Racquet Tennis is a truly wonderful sport. The more that you know about the sport, the more you will be able to choose the right equipment. Knowing just a little bit about having the most suitable equipment is only going to make the sport significantly more enjoyable. If you read about......
• Reformat Hard Drive And Install Windows 7 There are Two Main Types to reformat hard drive and install Windows 7 A reinstall allows you to keep all your software and personal settings. This method is of interest because you may unintentionally keep the actual glitch that you're attempting to completely eliminate. Our recommended Method: Do a full......
• Choosing the Right Ski Boots 101 pt 3 Here are some of the factors that you are going to want to consider when it comes to choosing the right ski boot: Buckles, Flex, Shell Material, Adjustability. Flex Some boots are naturally designed to flex more than other boots. Generally speaking, a stiffer boot is going to be preferred......
• Introduction to Bending Strings The History of String Bending and Gauges String bending is a technique that was founded by blues and country music players who wished to mimic the sound of bottleneck guitars, and later on, pedal steel-string guitars. Since then, bending has become a standard technique in the playing of guitars, because......